tlhr540., tlhy540., tlhg540. www.vishay.com vishay semiconductors rev. 1.9, 25-apr-13 1 document number: 83012 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high efficiency led, ? 5 mm tinted diffused package description the tlh.54.. se ries was developed for standard applications like general indi cating and lighting purposes. it is housed in a 5 mm tinted diffused plastic package. the wide viewing angle of these de vices provides a high on-off contrast. several selection types with di fferent luminous intensities are offered. all leds are categorized in luminous intensity groups. the green and yello w leds are categorized additionally in wavelength groups. that allows users to assemble leds with uniform appearance. product group and package data ? product group: led ?package: 5 mm ? product series: standard ? angle of half intensity: 30 featrues ? choice of three bright colors ? standard t-1? package ? small mechanical tolerances ? suitable for dc and high peak current ? wide viewing angle ? luminous intensity categorized ? yellow and green color categorized ? tlh.54.. with stand-offs ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? status lights ? off/on indicator ? background illumination ? readout lights ? maintenance lights ?legend light ? ? ? ? ? 19223 parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) at i f (ma) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max. tlhr5400 red 1.6 10 - 10 612 - 625 10 - 2 3 20 gaasp on gap tlhr5400-as12z red 1.6 10 - 10 612 - 625 10 - 2 3 20 gaasp on gap tlhr5401 red 4 12 - 10 612 - 625 10 - 2 3 20 gaasp on gap tlhr5405 red 6.3 14 - 10 612 - 625 10 - 2 3 20 gaasp on gap tlhr5405-as12z red 6.3 14 - 10 612 - 625 10 - 2 3 20 gaasp on gap tlhr5405-as21 red 6.3 14 - 10 612 - 625 10 - 2 3 20 gaasp on gap tlhr5405-ksz red 6.3 14 - 10 612 - 625 10 - 2 3 20 gaasp on gap tlhy5400 yellow 1.6 10 - 10 581 - 594 10 - 2.4 3 20 gaasp on gap tlhy5400-as12z yellow 1.6 10 - 10 581 - 594 10 - 2.4 3 20 gaasp on gap tlHY5401 yellow 4 12 - 10 581 - 594 10 - 2.4 3 20 gaasp on gap tlhy5405 yellow 6.3 14 - 10 581 - 594 10 - 2.4 3 20 gaasp on gap tlhy5405-ksz yellow 6.3 14 - 10 581 - 594 10 - 2.4 3 20 gaasp on gap tlhg5400 green 1.6 10 - 10 562 - 575 10 - 2.4 3 20 gap on gap tlhg5400-as12z green 1.6 10 - 10 562 - 575 10 - 2.4 3 20 gap on gap tlhg5400-bt12 green 1.6 10 - 10 562 - 575 10 - 2.4 3 20 gap on gap tlhg5401 green 4 12 - 10 562 - 575 10 - 2.4 3 20 gap on gap tlhg5405 green 6.3 15 - 10 562 - 575 10 - 2.4 3 20 gap on gap tlhg5405-as12z green 6.3 15 - 10 562 - 575 10 - 2.4 3 20 gap on gap tlhg5405-ksz green 6.3 15 - 10 562 - 575 10 - 2.4 3 20 gap on gap
tlhr540., tlhy540., tlhg540. www.vishay.com vishay semiconductors rev. 1.9, 25-apr-13 2 document number: 83012 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) in one packing unit i vmin. /i vmax. ? 0.5 note (1) in one packing unit i vmin. /i vmax. ? 0.5 absolute maximum ratings (t amb = 25 c, unless otherwise specified) ? tlhr54.., tlhy54.. , tlhg54.. parameter test condition symbol value unit reverse voltage v r 6v dc forward current t amb ? 65 c i f 30 ma surge forward current t p ? 10 s i fsm 1a power dissi pation t amb ? 65 c p v 100 mw junction temperature t j 100 c operating temperature range t amb - 20 to + 100 c storage temperature range t stg - 55 to + 100 c soldering temperature t ? 5 s, 2 mm from body t sd 260 c thermal resistance junction/ambient r thja 350 k/w optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? tlhr540., red parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 10 ma tlhr5400 i v 1.6 10 - mcd tlhr5401 i v 412-mcd tlhr5405 i v 6.3 14 - mcd dominant wavelength i f = 10 ma ? d 612 - 625 nm peak wavelength i f = 10 ma ? p - 635 - nm angle of half intensity i f = 10 ma ? - 30- deg forward voltage i f = 20 ma v f -23v reverse voltage i r = 10 a v r 615- v junction capacitance v r = 0 v, f = 1 mhz c j -50-pf optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? tlhy540., yellow parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 10 ma tlhy5400 i v 1.6 10 - mcd tlHY5401 i v 412-mcd tlhy5405 i v 6.3 14 - mcd dominant wavelength i f = 10 ma ? d 581 - 594 nm peak wavelength i f = 10 ma ? p - 585 - nm angle of half intensity i f = 10 ma ? - 30- deg forward voltage i f = 20 ma v f -2.43 v reverse voltage i r = 10 a v r 615- v junction capacitance v r = 0 v, f = 1 mhz c j -50-pf
tlhr540., tlhy540., tlhg540. www.vishay.com vishay semiconductors rev. 1.9, 25-apr-13 3 document number: 83012 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) in one packing unit i vmin. /i vmax. ? 0.5 note ? luminous flux is tested at a current pulse duration of 25 ms and an accuracy of 11 %. ? the above type numbers repres ent the order groups which include only a few brightness groups. only one group will be shipped on each bag (t here will be no mixing of two groups in each bag). ? in order to ensure availability, single brightness groups will not be orderable. ? in a similar manner for colors where wavelength groups are measured and binned, single wave length groups wi ll be shipped on any one bag. ? in order to ensure availability, single wavelength groups will not be orderable. note ? wavelengths are tested at a current pulse duration of 25 ms. ? ? ? ? ? ? ? ? ? ? ? optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? tlhg520., green parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 10 ma tlhg5400 i v 1.6 10 - mcd tlhg5401 i v 412-mcd tlhg5405 i v 6.3 15 - mcd dominant wavelength i f = 10 ma ? d 562 - 575 nm peak wavelength i f = 10 ma ? p - 565 - nm angle of half intensity i f = 10 ma ? - 30- deg forward voltage i f = 20 ma v f -2.43 v reverse voltage i r = 10 a v r 615- v junction capacitance v r = 0 v, f = 1 mhz c j -50-pf luminous intensity classification group luminous intensity (mcd) standard min. max. m1.63.2 n2.55 p48 q 6.3 12.5 r1020 s1632 t2550 u4080 v 63 125 w 100 200 x 130 260 y 180 360 z 240 480 color classification group dom. wavelength (nm) yellow green min. max. min. max. 0 1 581 584 2 583 586 3 585 588 562 565 4 587 590 564 567 5 589 592 566 569 6 591 594 568 571 7 570 573 8 572 575
tlhr540., tlhy540., tlhg540. www.vishay.com vishay semiconductors rev. 1.9, 25-apr-13 4 document number: 83012 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. ambient temperature fig. 2 - forward current vs. pulse length fig. 3 - rel. luminous intensity vs. angular displacement fig. 4 - forward current vs. forward voltage fig. 5 - relative luminous in tensity vs. ambient temperature fig. 6 - relative luminous intens ity vs. forward current/duty cycle 0 10 20 30 40 60 95 10046 50 i f - forward current (ma) 0100 80 60 40 20 t amb - ambient temperature (c) 0.01 0.1 1 10 1 10 100 1000 10 000 100 95 10025 0.02 0.05 0.1 0.2 1 0.5 t amb 85 c t p /t = 0.01 i f - forward current (ma) t p - pulse length (ms) 0.4 0.2 0 0.2 0.4 0.6 95 10042 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 i v rel - relative luminous intensity red t p /t = 0.001 t p = 10 s 0.1 1 10 100 1000 95 10026 v f - forward voltage (v) i f - forward current (ma) 10 8 6 4 2 0 0 0 0.4 0.8 1.2 1.6 95 10027 20 40 60 80 100 i v rel - relative luminous intensity t amb - ambient temperature (c) i f = 10 ma red 10 20 50 100 200 0 0.4 0.8 1.2 1.6 2.4 95 10321 500 0.5 0.2 0.1 0.05 0.02 1 i f (ma) t p /t 2.0 i v rel - relative luminous intensity red
tlhr540., tlhy540., tlhg540. www.vishay.com vishay semiconductors rev. 1.9, 25-apr-13 5 document number: 83012 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - relative luminous intensity vs. forward current fig. 8 - relative intensity vs. wavelength fig. 9 - forward current vs. forward voltage fig. 10 - relative luminous intensity vs. ambient temperature fig. 11 - relative luminous intensity vs. forward current/duty cycle fig. 12 - relative luminous intensity vs. forward current 0.01 0.1 1 10 i f - forward current (ma) 100 10 95 10029 i v rel - relative luminous intensity red 1 590 610 630 650 670 0 0.2 0.4 0.6 0.8 1.2 690 95 10040 - wavelength (nm) 1.0 red i v rel - relative luminous intensity 0.1 1 10 100 1000 10 8 6 4 2 0 95 10030 v f - forward voltage (v) i f - forward current (ma) yellow t p /t = 0.001 t p = 10 s 0 0 0.4 0.8 1.2 1.6 95 10031 20 40 60 80 100 i v rel - relative luminous intensity t amb - ambient temperature (c) yellow i f = 10 ma yellow 10 20 50 100 200 0 0.4 0.8 1.2 1.6 2.4 95 10260 500 0.5 0.2 0.1 0.05 0.02 1 i f (ma) t p /t i spec - specific luminous intensity 2.0 yellow i f - forward current (ma) 100 0.1 1 10 95 10033 i v rel - relative luminous intensity 10 1 0.01
tlhr540., tlhy540., tlhg540. www.vishay.com vishay semiconductors rev. 1.9, 25-apr-13 6 document number: 83012 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 13 - relative in tensity vs. wavelength fig. 14 - forward current vs. forward voltage fig. 15 - relative luminous in tensity vs. ambi ent temperature fig. 16 - specific luminous intensity vs. forward current fig. 17 - relative luminous intensity vs. forward current fig. 18 - relative intensity vs. wavelength 550 570 590 610 630 0 0.2 0.4 0.6 0.8 1.2 650 95 10039 - wavelength (nm) 1.0 yellow i rel - relative intensity 0.1 1 10 100 1000 10 8 6 4 2 0 95 10034 v f - forward voltage (v) i f - forward current (ma) green t p /t = 0.001 t p = 10 s 0 0.4 0.8 1.2 1.6 95 10035 i v rel - relative luminous intensity green i f = 10 ma t amb - ambient temperature (c) 20 40 60 80 0100 10 20 50 100 200 0 0.4 0.8 1.2 1.6 2.4 95 10263 500 2.0 green i spec - specific luminous intensity i f (ma) 0.5 0.2 0.1 0.05 0.02 1 t p /t i f - forward current (ma) 100 green 0.1 1 10 95 10037 i v rel - relative luminous intensity 10 1 520 540 560 580 600 0 0.2 0.4 0.6 0.8 1.2 620 95 10038 - wavelength (nm) 1.0 green i rel - relative intensity
tlhr540., tlhy540., tlhg540. www.vishay.com vishay semiconductors rev. 1.9, 25-apr-13 7 document number: 83012 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters reel fig. 19 - reel dimensions as12 = cathode leaves tape first as21 = anode leaves tape first tape fig. 20 - led in tape (4.7) 12.5 0.3 a c 35.5 0.55 < 0.7 1.1 0.25 0.5 + 0.15 - 0.05 ? 5 0.15 2.54 nom. 0.5 + 0.15 - 0.05 ? 5.8 0.15 8.7 0.3 7.7 0.15 1 min. area not plane technical drawings according to din specifications r 2.49 (sphere) 6.544-5258.02-4 issue: 7; 23.07.10 95 10916 identification label: 355 90 30 48 45 52 max. 948641 vishay/type/group/tape code/production code/quantity paper adhesive tape identification label reel tape diodes: anode before cathode phototransistors: emitter before collector code 21 diodes: cathode before anode phototransistors: collector before emitter code 12 94 8671
tlhr540., tlhy540., tlhg540. www.vishay.com vishay semiconductors rev. 1.9, 25-apr-13 8 document number: 83012 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ammopack fig. 21 - tape direction note ? as12z and as21z still vali d for already existing types but not for new design tape dimensions in millimeters option dim. h 0.5 mm dim. x 0.5 mm as 17.3 - bt 20.0 16.0 ks 19.3 - tape feed c b a 94 8667-1 label quantity per: 1000 948172_1 ammopack/reel (mat.-no. 1764)
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
